NEWS

Cheehung Lighting

Methods for Selecting Appropriate LED Power Drivers


Methods for Selecting Appropriate LED Power Drivers

I.Overall Principles

Constant Current Drive

The ideal method for driving LEDs is constant current due to their unique current and voltage characteristics.Constant current driving prevents current fluctuations when the forward voltage of an LED changes,ensuring stable brightness.

Heat Dissipation Considerations

The luminous flux of LEDs is inversely proportional to temperature.Therefore,when selecting LED power supplies,its crucial to minimize heat generation.An effective cooling system is essential to reduce the operating temperature of the LED,enhancing its performance and lifespan.

Temperature Control

To ensure the longevity of LEDs,controlling the junction temperature within a certain range is vital.

II.Ten Points of Attention

High Reliability

The quality of the LED power supply directly impacts the overall quality of LED products.High-altitude installations like street lights require highly reliable power supplies due to the inconvenience and cost of maintenance.

High Efficiency

LEDs are energy-efficient,and so should their power supplies.High power supply efficiency means less power loss and less heat generation,reducing luminaire temperature rise and delaying LED light decay.

Constant Current Drive Mode

To align with the VI characteristics of LEDs,the power supply must employ a constant current drive method.

Impact Protection

LEDs have relatively poor resistance to impacts,especially for outdoor products affected by grid load start-up and lightning strikes.LED drivers should suppress surge intrusion and protect LEDs from damage.

Temperature Protection Function

Beyond conventional protection,incorporating a negative feedback of LED chip temperature in the constant current output prevents the PN junction temperature of the LED chip from becoming too high.

LED Power Supply Lifespan

The lifespan of the power supply should closely match that of the LED chip.

Work Environment

LED lamps operate in various environments,with factors like temperature,humidity,and installation location affecting performance.Soft start circuits are necessary to protect LEDs from voltage spikes at power-up.

Power Factor of LED Driver Power Supply

The power factor is a critical consideration for energy-saving products,especially when used on a large scale.

Design without Electrolytic Capacitors

Electrolytic capacitors have the shortest lifespan on a circuit board.To match the lifespan of the light source,a driver without electrolytic capacitors is preferable.

Set the Flow Rate Limit

When driving multiple LED cores,its essential to set a current limit in addition to constant current,considering the series and parallel relationships to prevent accidents.

III.Matching the Light Source

Understand the Parameters of the Light Source

Understanding the current and voltage of your light source is crucial for matching it with the power supply.For example,two parallel 0.5W 2835 LEDs require a 300 mA current.Pair this with a constant current driver with a voltage range not less than 50-60V and a current of 300 mA.

Consider the Power Output Type

LED power supplies typically have two output typesconstant current and constant voltage.
• Constant Current Source Output:Ensure the output voltage matches the operating voltage of the LED lights.For instance,constant current LED power supplies with currents from 200mA to 300mA have output voltages ranging from 9V to 13V,10V to 25V,24V to 42V,and 45V to 63V.Choose based on actual conditions.
• Constant Voltage Source Output:With the same output voltage,different output currents are available.Select based on the LED power type,considering output voltage or current.

Also,consider the power range of the LED power supply to avoid burning out LED beads or causing flickering.

For Different Types of LED Lighting Fixtures

LED Streetlights
• Drive Mode:Choose between constant current and constant voltage types.
• Constant Current Mode:Not afraid of short circuits but cannot be completely open-circuited.Pay attention to maximum current and voltage values.
• Constant Voltage:Output voltage is fixed,and output current changes with the load.Immune to open circuits but strict prohibition of short circuits.

Smart Control LED Lighting Fixtures(e.g.,LED streetlights and LED tunnel lights)

Intelligent control is a key advantage of LED lighting fixtures.For street and tunnel lights,it enables stepless power control,adjusting for traffic density and time periods for energy savings.In tunnels,it can automatically adjust brightness for safe visual transitions.When selecting power supplies,consider heat dissipation,protection,and modular design for maintenance.

Relevant News


A summary of the advancements in energy-saving technology for LED lamp beads is presented herewith.

A summary of the advancements in energy-saving technology for LED lamp beads is presented herewith.  1. Intelligent Control System Depth Integration Automatic dimming in accordance with the prevailing environmental conditions: The integration of an intelligent control system with LED light beads is more profound, enabling the automatic adjustment of brightness in accordance with the ambient light intensity. In conditions of high luminosity, such as during the daytime or in environments with abundant natural light, the LED lamp beads can reduce the brightness or even turn off entirely. Conversely, at night or in low-light settings, the brightness is automatically increased to meet the necessary illumination levels. This approach avoids energy wastage in situations where it is not required, significantly enhancing the efficiency of energy utilisation.